What the diamond really is, and how it’s been stolen from us

By now, the diamond has become a big topic in diamond collecting circles.

A new website called Diamonds and Stones, for example, will give you a quick overview of the diamond’s history, and a more detailed look at the various stones you can find on the market.

And that’s just scratching the surface of the history behind diamonds, which can be quite extensive.

But how do you know which stone is the real deal?

Diamonds are made from the raw gemstones that have been cut from a gemstone’s surface.

That’s why you can often see them on the jewelry display at an auction house.

But, if you want to know which gemstone is the true diamond, you have to do some research first.

The first thing you need to do is figure out the weight and density of the gemstone you’re looking for.

A single diamond can weigh up to 100 grams, but most are larger, with more than 200 grams, according to the International Gemological Society.

If you’re buying a diamond from an auction or a jeweler’s shop, you might be able to find a gem that has a value of up to $1,000.

Diamonds made from a single stone are often called gemstones.

And a diamond is a metal that contains diamonds in the form of a thin layer of carbon.

That means that a single gemstone can have hundreds of tiny diamonds embedded within it.

But it also means that, unlike diamonds made of diamond dust, gemstones do not tend to rust.

The reason for this is because the tiny crystals that form the diamond matrix are often too small to rust, so they don’t corrode and weaken the diamond.

For this reason, most gemstones are hard and brittle, which means that the smaller and smaller the gem, the harder and harder it will eventually wear and eventually crack.

A diamond made from an older stone that has been in contact with a more fragile stone has less of a tendency to break down and crumble, and it can also have a longer shelf life than newer gemstones with a higher melting point.

A good way to figure out which gem is the genuine diamond is to try to cut it into smaller pieces.

You can usually see these pieces of the stone in the gem shops, but if you’re trying to buy the exact same stone, you should also look for a seller who has tested it before, and the buyer should have a certificate from a professional who can certify the authenticity of the specimen.

It’s not always possible to know what kind of specimen is actually the real thing, however.

If the seller’s certificate doesn’t have the “golden” mark on it, the specimen may not be the real diamond.

In fact, there is another reason that some people prefer to test the gemstones before buying it.

“It can be tempting to go to the gem shop and look at a diamond,” says Paul E. Bowerman, president of the Gemological Institute of America.

“The buyer will look at you like you’re crazy, and you may even be in a hurry to get it.

So if you have a very, very old specimen that’s been cut, you may not have time to wait for it to be tested, so you’re better off finding a diamond seller and paying up for the gem.”

That’s because, at this point, the seller can test the stone for flaws.

“If there’s a large hole in the stone, it could be because it was damaged in an accident, or because it’s in poor shape,” says Bowermans assistant professor of gemology, Andrew A. Tamburello.

“And then, the buyer will take the diamond and run it through a machine to check it out.”

A common problem that can occur with gemstones is that they’re not as well protected as other precious metals.

If a diamond’s surface has been damaged, it’s possible that the gem can get caught in the cracks in the surface.

The cracks, in turn, can cause the gem to get rubbed or scratched by the owner.

To avoid these problems, the gem’s maker will often add a layer of protective film around the gem.

The film is usually of one of two types: a transparent film that absorbs light, and an opaque film that protects the diamond from damage by the sun.

It takes a bit of research to find the right film, though, because different brands of film can look slightly different.

“Typically, the transparent film is cheaper, and can last for a very long time,” says Tambures.

The opaque film is more expensive, but it doesn’t last as long, and is usually just a thick layer of plastic that has come off.

“But you may find it at a jewelers or a jewelry store,” he adds.

“You may even find a brand you’ve never seen before.”

The difference in the film between the two types of film is what makes it easier for the diamond to survive